Features
  • Max. 120m transmission distance over Cat.5e/6 with 15Mbps
  • Supports resolutions up to 1080p@60Hz using H.264 compression incl. four display modes: “One-to-One”, “One-to-Many”, “Many-to-One” or “ Many-to-Many”
  • LED channel display, channel switching via button
  • Power supply via PoE or power supply unit as well as bi-directional RS-232 transmission and IR pass-through
  • For usage in a set together with receiver PT-IPAV-E2-RX (seperatly)
PureTools PT-IPAV-E2-TX - HDMI to IP Extender Transmitter
PureTools HDMI to IP Extender Transmitter - Convert AV signals to IP-based Ethernet signals.
This is the transmitter unit as a supplement to the PT-IPAV-E2-RX receiver.
Multicast, PoE and RS232 Support
AV over IP - Use proven Ethernet 100Mbps network technology to transmit AV signals!
 
The PureTools PT-IPAV-E2 offers four display modes: one-to-one, one-to-many, many-to-one and many-to-many, offering a choice of 16 pre-programmed channels. Additional channels can be added as required. An almost unlimited number of transmitters or receivers can be integrated into each channel.
 
With the PT-IPAV-E2, AV resolutions up to FullHD / 1080p@60Hz can be transmitted over a distance of 120m via Cat.5e or Cat.6 with an average of 15Mbps - The codec used is H.264.
 
The receiver has an integrated RS232 interface, which can be bi-directionally controlled from both sides.
There is also a push button switch for channel selection, including a digital display on the front of the unit - for easy access in difficult installations.
 
The built-in IR forwarding function allows control of a connected device from a remote location - Optimal when the IR signal is to be sent back to the source device against the AV signal direction.
 
To power the PT-IPAV-E2 Extender Set, seperate power supplies or Power-over-Ethernet (PoE) can be used.
Features
Max. 120m transmission distance over Cat.5e/6 with 15Mbps
Supports resolutions up to 1080p@60Hz using H.264 compression incl. four display modes: “One-to-One”, “One-to-Many”, “Many-to-One” or “ Many-to-Many”
LED channel display, channel switching via button
Power supply via PoE or power supply unit as well as bi-directional RS-232 transmission and IR pass-through
For usage in a set together with receiver PT-IPAV-E2-RX (seperatly)
Logistics Information
Product 1. Net Weight in Kg 0,27
Product 1. Gross Weight in Kg 0,64
Product 1. Length in cm 11,9
Product 1. Width in cm 7,95
Product 1. Height in cm 2,8
Packaging 1. Length in cm 20,5
Packaging 1. Width in cm 15,5
Packaging 1. Height in cm 5,5
Master Carton Length in cm 43
Master Carton Width in cm 32
Master Carton Height in cm 31
Product Information
Europeans Customs Tariff Nr. 85176200000
Country of Origin China
Packaging Material Paper
VPE Information
Master Packaging Unit (pcs) 20
Connections
Input connector(s) 1x HDMI-A Female port
Output connector(s) 1x RJ45 output, 1x HDMI loop out
Power connector(s) DC 5V1A
Control connector(s) Phoenix RS232 with 2400bps
Electric signal
Maximum pixel clock / bandwidth ca. 15Mbps
Mechanical
Power supply Max. 3W
Power consumption DC 5V1A
Operating temperature -5°C to +35°C
Humidity 5% to 90%
Enclosure Steel
Dimensions 119 x 79.5 x 28mm
Signal transmission
Supported standards H.264 via TCP/IP
Transmission modes HDMI via IP
Supported audio standards LPCM, Audio sampling rate 48KHZ
Maximum resolution 1080p@60Hz
Weiteres
Colour Black
Warranty 1 year
Delivery Content
1x PT-IPAV-E2-RX AV over IP Transmitter
1x IR Remote Control + 1x IR Cable RX+TX, 1m
1x 5V1A Power Supply
1x Installation Kit
1x User Manual + 1x Software CD