- Transmission of up to 4K UltraHD video with HDCP 2.2 and PoE
- Supports stereo and Dolby Digital 5.1 audio formats, Dolby DSP
- Stereo audio output 3.5mm with adjustable delay and volume
- Image pull, instant seamless switching
- Control via RS232, IR, CEC and USB 2.0 for KVM
JustAddPower Cutting-Edge Video Transmitter
Experience the future of video transmission with the cutting-edge video transmitter by JustAddPower. This state-of-the-art device offers a range of impressive features for seamless and high-quality video streaming.
UltraHD video transmission: Enjoy stunning 4K UltraHD video transmission with HDCP 2.2 and PoE support. Experience crystal-clear visuals like never before.
Immersive audio formats: The video transmitter supports stereo and Dolby Digital 5.1 audio formats, enhanced with Dolby DSP technology. Immerse yourself in a captivating audio experience.
Adjustable audio output: Connect your audio devices to the stereo audio output with a 3.5mm jack. Customise the delay and volume settings for optimal audio performance.
Instant seamless switching: With image pull technology, enjoy instant and seamless switching between video sources. Say goodbye to interruptions and delays.
Multiple control options: Take full control of your video transmitter with various control options including RS232, IR, CEC, and USB 2.0 for KVM functionality. Enjoy effortless management and operation.
JustAddPower is one of the worlds leading manufacturers of HDMI over IP based video switching solutions. Create simple point-to-point systems or a network of HDMI devices, scalable to any size, with easy-to-use hardware solutions. The design and product philosophy is evolutionary: The products are designed for long service lives instead of short innovation cycles. Support and replacement parts for older solutions remain available.
JustAddPower continuously enhances the performance of each product generation by providing free firmware updates that support all actual features, while being fully backwards compatible. In case functions can not be realized by software alone, also new ardware is backwards compatible. JustAddPower takes pride in knowing that their HD / IP systems not only protect customer investments but actually increases its value over time.
The JustAddPower 3G chipset is flexible,affordable, and feature rich, all without sacrificing an ounce of performance or quality.
Flawless video with seamless HDR Management and Audio Management in any format up to Dolby Atmos.
JustAddPower is the only HDMI over IP system built on the sustainable Evolution not Revolution Design platform. That means you dont toss out Products after a year or two. JustAddPower products are designed for Decades of use!
- Flawless Performance
- Buy it Once
- Use for Decades
- Forward Compatibility
- Backward Compatibility
- Free Updates
- Same Switch
- Same Cabling
- Same Control Drivers
Further, JAP devices and the third-party switch cannot be configured using JADConfig, so each device and the third-party switch must be configured separately and manually!
In addition, the control options via "MediaSwitcher" are not available - additional hardware / software is required.
We also ask for your understanding that we cannot offer direct support for configuration and / or control of your JAP system if you use it with a third-party switch.
General JustAddPower Specifications and Features:
4K Up & Downscaling
Receivers can downscale an UltraHD / 4K / 2160p signal with HDCP 2.2 to FullHD / 2K / 1080p for viewing on legacy screens and upscaling for 4K displays
Seamless HDR Management
Display HDR content on HDR displays while simultaneously displaying the same content on 1080p and 4K on non-HDR displays
Zero Detectable Latency
Incredibly low encode / decode latency over the network that is visually undetectable
Works with all 4K Sources
EDID Magic software = Zero EDID issues
Switching between any source is instant, even when resolution changes
Preview image of any source or display in any web browser or control system up to 10 fps
VGA & HDMI Wall Plate Inputs
VGA and HDMI Wall Plate Transmitters available in multiple colors
DHCP Server allows shared gigabit LAN without bogging down your network
Use any Gigabit switch or VLAN switching
HDCP 2.2 Support
3G seamless HDCP conversion allows content to be shown on any display, even if it isnt HDCP 2.2
Analog Audio Inputs and Outputs
Analog audio inputs can be mixed or muted with HDMI audio and analog Audio Outputs with adjustable volume and delay on each Transmitter and Receiver
Custom Logo Overlay & Default Image
Overlay a custom logo on any display and load a custom default image
Dolby Atmos and Dolby Downmix
Dolby Downmix to analogue Audio and support for DTS:X and Dolby Digital
Four custom windows per tiler. Add more for unlimited windows (view on any screen)
Build up to 256 displays in a single dynamic wall with Image Flip and Rotate function for portrait or landscape installations
Free Automatic Drivers
Custom drivers auto build and configure to the network
Any Size Matrix
Hundreds of sources and thousands of displays in a single project
USB 2.0 Over IP
Keyboard, mouse, touch Interface over IP built in
|Transmission of up to 4K UltraHD video with HDCP 2.2 and PoE
|Supports stereo and Dolby Digital 5.1 audio formats, Dolby DSP
|Stereo audio output 3.5mm with adjustable delay and volume
|Image pull, instant seamless switching
|Control via RS232, IR, CEC and USB 2.0 for KVM
|Product 1. Net Weight in Kg
|Product 1. Gross Weight in Kg
|Product 1. Length in cm
|Product 1. Width in cm
|Product 1. Height in cm
|Packaging 1. Length in cm
|Packaging 1. Width in cm
|Packaging 1. Height in cm
|Master Carton Length in cm
|Master Carton Width in cm
|Master Carton Height in cm
|Europeans Customs Tariff Nr.
|Country of Origin
|Master Packaging Unit (pcs)
|1x HDMI, 1x 3.5mm Stereo MIC, 1x 3.5mm Stereo LINE, 1x RS232, 1x USB
|1x Gigabit LAN (RJ45), 1x 3.5mm Stereo